Leaky Faucet Repairs – How to Stop the Drip, Drip, Drip
Leaky faucet repairs can cost you some money, but not fixing a leaky faucet can cost you a lot more.
In just a few simple steps, you can take your faucet and repair it, stop the dripping, and end the waste of water. You don’t even need to hire an expensive plumber if you’re willing to take the time to get the right tools and the patience to do it right the first time.
The first thing to do when you start your leaky faucet repair is to cut the water supply off. The shut-off valve is usually under the sink. Turn that off and you’re set to go, but double-check by turning the faucet on. The next thing you need to do is loosen the packing nut. That’s the nut holding the actual faucet down, and its right under the faucet itself. Pull out the whole valve unit, twisting and turning the faucet until it’s loose.
Now that your leaky faucet repair is halfway done, replace the old washer with a new one. It should be screwed in the old valve unit, so unscrew it and replace it with a new one. Now, take the valve unit, put it back, turn the handle so it’s where it should be, and then tighten the packing nut. Once that’s done, open up the shut-off valve and test to see if you have any leaks. If you still have a leak and are pretty sure the washer is the problem, then maybe you should try a new sized washer.
The leaky faucet repair, once it’s done, is a simple one you can do without spending a lot of money. But sometimes if the washer isn’t the problem then maybe you need a new faucet. Maybe you missed a step, or didn’t tighten something up the right way.
Always pay attention because if you don’t re-do everything you un-do, you could have a bigger problem in the end than what you started with. Make sure you lubricate the threads, because that can also help by increasing a seal. Don’t throw your money away, fix that leaky faucet today. Our website has more tips for you to not just save you stress but save you money, too.
Mail this post
Posted under Faucet Repairs
This post was written by admin on February 11, 2009
